Welcome to TechPlate's Firearms Price List
bar_t.gif (803 bytes)
Tooling Finishes FirearmsPrices Glossary Dura-Plate
MinimunPrices Order Contact Links Home
bar_b.gif (803 bytes)

  September 2017
gun.gif (19303 bytes)



TECHPLATE, INC. has been refinishing firearms for over 36 years at the same location. We are a job shop specializing in tooling, precision components and firearms. 

We have been privileged over the years to have such customers as Will's Gunsmithing, Wilson Combat, Smith&Wesson Performance Center, Pachmyer, Tussey Custom, RD Burns, Arotek, Kodiak, and the list goes on with many fine shooters as well. 

We offer a variety of finishes including: Hard Chrome (matte, brush & polished); Parkerizing (black & gray); Bluing (polished & satin); Bluing on Stainless; Teflon; Gold; Silver; Electroless Nickel; Bright Nickel; Hard Black Anodizing (aluminum AR Receivers Top & Bottom); Regular Anodizing, Polymer Coatings & Titanium Nitride.  As well as  Masking; Bead Blasting & Polishing. Please let us show you what we can do for you.

CA DOJ Requirements For FFL Dealers
[18 U.S.C. 922(a)(3) and (5), 922(d), 27 CFR 478.29 and 478.30
A person may transfer a firearm to a licensee in any State. 
Revolvers Rifles
Bull Barrel
Small Parts (each)
  Order Form
Rifle $625.00
Receiver  $90.00 
Small Parts (each)
Pistols Shotguns
Pistol $600.00
Frame $200.00
Frame / Internal Parts $225.00
Slide $ 70.00
Extra Magazines $ 18.00
Small Parts (each)
Compensators $ 22.00
- OrderForm
Shotgun (Single)  $625.00
Double Barrel  $710.00
Over And Under Shotgun  $625.00
Receiver   $200.00
Small Parts (each)
Barrel Bore Hard Chrome    $150.00
- -
- OrderForm
Other Miscellaneous
Contender 450.00
XL 450.00
ARReceiver(HardAnodize) 120.00
Desert Eagle
Polishing $85.00/hr.
Strip Nickel or Chrome     100%
Dis, Assy & Test $150.00 
Masking Minimum
FFL: Please Request Copy
COE No: 000014635
CLFF No: 70151
Dip Only Bluing: All parts received in a ready-to-blue condition will be charged at 50% of the above prices & processed on a best effort basis. Your work order must say "Dip Only Bluing". No other discounts apply. Void where prohibited.      
All gun parts received are counted and compared to customers' count. Without a customer  count to compare to we accept no responsibility for parts quantity. Our receiving inspection department documents a description of your firearm's condition. Customers are notified of conditions beyond the acceptable tolerance of TechPlate. This is especially important when one might think the plating will fill or hide flaws. All plated components are baked to relieve hydrogen embrittlement; because, contrary to marketing propaganda, all electroplated parts are subject to this phenomenon. This service is provided for in the above prices. By special request all pistols and revolvers which have been hard chrome plated may be coated on the interiors surfaces with  zinc phosphate to provide corrosion protection. Please note in all cases minimum prices may apply: Minimum Price List. As usual, prices are subject to change without notice.  These prices are a general outline.  Your price may vary.
bar_b.gif (803 bytes)
Tooling Finishes Firearms Glossary Dura-Plate
MinimunPrices Order Forms Contact Links Home
TechPlate, Inc.
1571-H S. Sunkist St. Anaheim, CA 92806 
Tel: 714.634.9254 - Fax: 714.634.9382  -  Toll Free: 1.800.553.1668
E-mail: plating@techplate.com
1999-2017 TechPlate, Inc. All rights reserved.